产品详情:
Tulsimer ® ARR-1去除甲醛用离子交换树脂
Tulsimer ® ARR-1 是一款专门开发的,特级,强碱型阴离子交换树脂,其为聚苯乙烯架构,季铵基官能团,具有优良物理和化学稳定性。
Tulsimer ® ARR-1 出厂为亚硫酸氢盐的型式,确保交换网络的最小90%是亚硫酸氢盐的型式。亚硫酸氢盐型的主要是用于Tulsimer ® ARR-1从乙二醇水溶液中去除甲醛杂质。
Tulsimer ® ARR-1 按照最严格的质量控制标准制造,以确保含有最少的金属杂质。
典型特性(TYPICAL CHARACTERISTICS):Tulsimer ®ARR-1
树脂类型/Resin Type 强碱型阴离子交换树脂
官能团/Functional group 交联聚苯乙烯
物理型式/Physical form 湿润球状/Moist spherical beads
离子型式/Ionic form supplied 亚硫酸氢盐
官能团/Functional group 季铵基
粒度分布/Particle size Distribution 0.3 - 1.2 mm
PH 范围/PH range 0 - 14
总交换量/Total exchange capacity( meq/ml ) 1.0 meq/ml mini
容积密度/Backwash settled density 670 - 720 gm/lit
最大温度/Maximum Thermal Stability 80℃(175℉)
湿度/Moisture content 55±3%
溶解度/Solubility 不溶
操作条件特性(TYPICAL OPERATING CONDITIONS):Tulsimer ®ARR-1
树脂床高度/Resin bed depth 800 mm 最大流速/Maximum service flow 60m³/hr/m³ 逆洗膨胀空间/Backwash expansion space 50 - 70% 逆洗膨胀空间/Backwash expansion flow rate(25℃) 4 - 6m³/hr/㎡ 再生剂/Regenerant NaHSO3 再生程度/Regeneration level 10-12.5 lbs/ ft3 再生浓度/Regeneration concentration 4 - 6%
操作温度/Maximum Operating temperature 80℃ max 冲洗流速/Rinse flow rate: 慢/slow 再生流速/At Regeneration flow rate 快/fast 工作流速/At service flow rate |
测试(TESTING):Tulsimer ®ARR-1
离子交换树脂的抽样和测试是按标准的测试程序,即ASTMD - 2187和IS - 7330,1998.
包装(PACKING):Tulsimer ®ARR-1
For Handling, Safety and Storage requirements please refer to the individual Material Safety Data Sheets available at our offices. The data included herein are based on test information obtained by Thermax Limited. These date are believed to be reliable, but do not imply any warranty or performance guarantee. Tolerances for characteristics are per BIS/ASTM. We recommend that the user should determine the performance of the product by testing on his own processing equipment.
For further information, please contact::